LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 106 / 214

StorView RAID Module
98
• Connection - This option sets the type of connection that is being used from the host or switch. Use
the Automatic setting for most environments where it will attempt to use Loop Only first then Point
to Point. For custom settings, if you are connecting to a FL_Port switch or NL_Port HBA then select
Loop Only, and if you are connecting F_Port switch or N_Port HBA then select Point to Point.
9.2.3.3 E5402E/E5412E RAID Controller Systems
In the Host Ports section, you can change the data rate.
• Data Rate - Use the Automatic setting for most configurations. If you choose to use a specific setting
(1.5 Gbits/sec. or 3 Gbits/sec.) you override the automatic setting. Be sure the software setting here
matches the hardware switch setting on the HBA ports.
Figure 9–7 Advanced Settings Window - E5402E/E5412E