LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 33 / 214

Embedded StorView Setup
25
3.1.3.1 Using Dynamic IP (DHCP)
Note StorView does not display the TCP/IP information when Dynamic IP (DHCP) is selected. You must use
a third-party network administration program to obtain this information.
To use the DHCP Server network interface setting:
1 Click the option button next to Dynamic IP (DHCP ).
2 Click the APPLY button to make the changes effective.
3 Click the CLOSE button.
3.1.3.2 Using Static IP
To manually configure the network interface setting:
1 Click the option button next to Static IP .
2 Enter the desired IP address in the “IP Address” field and press the < Tab > key or click in the Subnet Mask
field.
3 Enter the desired Subnet Mask in the “Subnet Mask” field and press the < Tab > key or click in the Default
Gateway field.
4 Enter the desired gateway or router address and press the < Tab > key or click in the DNS Server field.
5 Enter the desired DNS Server IP address.
6 Click the APPLY button to make the changes effective.
7 Click the CLOSE button.
3.1.4 Getting a New IP Address
If you are set up to receive your IP address using Dynamic IP (DHCP), you can force the embedded
StorView server to obtain a new IP address from your DHCP server.
1 Click the SETTINGS button and select the PREFERENCES tab.
2 Click the Renew check box.
3 Click the APPLY button to make the changes effective.
4 Click the CLOSE button.