LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 170 / 214

StorView RAID Module
162
The controller has started
updating a drive’s firmware.
Drive w/SN <
xxxxxx > (Slot
< nn > ID:< zz> Firmware
Version: < yy.yy.yyyy ).
Information
[0xB66 (2918)] The controller has started
updating a drive’s
firmware. Drive <w/sn
<xxxxxxx> or w/wwn
<
xxxxxxxxxxxxxxxx >, Slot
< nn >, Enclosure < nn >,
Firmware Version:< xxxx >.
No action necessary.
The controller has finished
updating a drive’s firmware.
Drive SN: <xxxxxxx> ID:<
zz>
(Slot < number >) Firmware
Version: < yy.yy.yyyy ).
Information
[0xB67 (2919)] The controller has finished
updating a drive’s
firmware. Drive w/SN
<xxxxxxx> or WWN
<
xxxxxxxxxxxxxxxx >, Slot
< nn >, Enclosure < nn >,
Firmware Version:< xxxx >.
No action necessary.
An array expansion has
started on Array <
name >.
Information
[0xB68 (2920)] Expansion has started. No action necessary.
An array expansion has
completed on Array <
name >.
Information
[0xB69 (2921)] Expansion has
completed. No action necessary.
An array expansion has
restarted on Array <
name >.
Information
[0xB6A (2922)] Expansion has restarted. No action necessary.
The writeback cache on Array
<
name > has been disabled.
Reason(s): (S ee causes ).
Information
[0xB6F (2927)] Disabling of writeback
cache for the indicated
reasons:
• The partner controller
has failed.
• The battery is not
charging or present.
• The array has become
critical.
• A “prepare for shutdown”
was received by the
controller.
• Replace the failed
controller.
• Charge the backup
battery or re-install the
battery.
• Resolve the array issue
and rebuild the array.]
• No action necessary.
The writeback cache on Array
<
name > has been re-enabled.
Information
[0xB70 (2928)] Re-enabling of writeback
cache. No action necessary.
Because of a background
verify failure, data blocks at
LBA <yyy> from drive SN:
<xxxxxxx> (SAS: w/ WWN
<
xxxxxxxxxxxxxxxx >) (Slot
< number >) have been
reallocated.
Warning
[0xB71 (2929)] Data Blocks at LBA < yyy >
on Drive w/ SN < xxxxxxx >
(SAS: w/ WWN
<
xxxxxxxxxxxxxxxx >)
(Slot < nn >, Enclosure
< nn >) have been
reallocated.
No action necessary.
Drive & Array Event
Messages Type [ID] Cause Action