LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 161 / 214

Event Logs
153
A stripe synchronization of a
RAID set has completed. Information
[0xB2D (2861)] A controller fails or is
powered off during a
RAID write operation. No action necessary.
The configuration has
changed. Information
[0xB2F (2863)] A change in the
configuration has
occurred. If you are using the Save
Configuration feature, re-
save your configuration
information - it no longer
matches, otherwise no
action is necessary.
The controller is flushing the
partner’s mirrored cache to the
drives. There are <
xx > cache
entries totalling < yy > 512-byte
blocks.
Information
[0xB35 (2869)] Failure or removal of the
partner controller. No action necessary.
The controller has completed
flushing the partner’s mirrored
cache to the drives. Information
[0xB36 (2870)] Completion of mirrored
cache flushing. No action necessary.
The battery backup unit
attached to the controller is
now functioning correctly.
Line Power Mode
Information
[0xB42 (2882)] Battery charging
complete.
Special feature mode.
Controller can be
operated with battery
removed and no LED
indication occurs.
No action necessary.
The controller has been
powered off. Information
[0xB50 (2896)] Removal of controller or
power. No action necessary.
The controller has been
powered on. Information
[0xB51 (2897)] The controller was
powered on. No action necessary.
The controller self-test was
successfully completed. Information
[0xB52 (2898)] Self-test completion on
startup. No action necessary.
The controller self-test has
failed. Error
[0xB53 (2899)] Self-test failure on
startup. Replace the controller.
The controller’s NVRAM has
been reset. Information
[0xB54 (2900)] Occurs first time after
production. No action necessary.
The controller has an invalid
World Wide Name. Error
[0xB55 (2901)] Occurs first time after
production. Contact technical
support.
The Event Log has been
cleared. Information
[0xB56 (2902)] The user has cleared the
event log. No action necessary.
The controller has been reset. Information
[0xB57 (2903)]
User initiated a controller
reset. No action necessary.
Controller Events Messages Type [ID] Cause Action