LaCie 131018 - StorView Snapshot - Mac, User Manual

Page: 64 / 214

StorView RAID Module
56
4 Click the CLOSE button on the Array screen.
From the Main screen you can monitor the initialization.
Placing the mouse pointer over the progress bar will display the percent complete for the initialization
progress in a pop-up window. The drive member icons of this array will change to an animated icon
indicating the array is initializing.
You can stop the initialization process, if you wish, by clicking the Stop link located to the right of the
progress bar.
6.3.1 Pause/Resume the Initialization
You can temporarily pause the initialization process, and resume the process at a later time.
6.3.1.1 Pause Initialization
1 Click the PAUSE link located just to the right and below the progress bar.
The “Pause” link will change to “Resume” and the progress bar will stop its forward motion.
6.3.1.2 Resume Initialization
1 Click the RESUME link located just to the right and below the progress bar.
The initialization will continue from the point where it was paused.
Figure 6–9 Monitoring the Initialization Progress (RS-4835-F4-5404E Shown)