KUHN AXIS 20.1, Operator'S Manual

Page: 106 / 216

Spreading Operation B
94
AXIS-GENERAL
AXIS
20.1
Running the test (example on left side of spreader):
Figure 21: Attach calibration test chute
3. Attach the calibration test chute under the left outlet (according to the direc-
tion of travel).
4. Set the metering slide stop to the scale value specified in the calibration chart.
NOTICE
The calibration test should be carried out on only one side of the solid fertiliser
broadcaster. For safety reasons, however, both spreading discs must be re-
moved.
1. Use the adjustment lever to
loosen the cap nuts on the
spreading discs. Remove
the spreading disc from its
hub.
Figure 20: Release cap nuts
2. Set the drop point to 0 .
Symbol:
Kg