KUHN AXIS 20.1, Operator'S Manual

Page: 74 / 216

Standard operating procedure (all models) 8
62
AXIS-GENERAL
Correcting the spreading range
The specifications in the provided assembly manual are standard values. If there
are deviations in fertiliser quality it may be necessary to correct the setting.

To decrease the spreading distance, move towards the spreading disc.

To increase the spreading distance, move away from the spreading disc.
8. 9 Calibration of the TELIMAT T 25, T 50 (optional equipment)
The Telimat T 25, T 50 is a remote-controlled boundary and edge spreading sys-
tem for working widths of
12 - 42 m (or boundary spreading only, depending on
the fertiliser type).
The TELIMAT T 25, T 50 is mounted on the
right side of the direction of travel of
the solid fertiliser broadcaster. It is actuated by a single action control valve from
the tractor.
8.9.1 Calibrating the TELIMAT
The TELIMAT is prepared for spreading in accordance with the fertiliser type ,
the working width and the desired type of spreading (environmentally opti-
mised or yield-optimised boundary spreading).
NOTICE
Attachment of the TELIMAT to the solid fertiliser broadcaster is described in de-
tail in a separate assembly instruction manual. This assembly manual is sup-
plied with the TELIMAT.
NOTICE
The settings for the TELIMAT can be found in the calibration chart.