KUHN AXIS 20.1, Operator'S Manual

Page: 185 / 216

Maintenance and repair
173
C
AXIS
20.1
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
Disengaging the actuator for the drop point adjustment
Standard setting of the inner yoke

Remove the pin.
Figure 24: Disengage actuator
NOTICE
The inner and outer yokes must have the same setting on both sides. Proceed
as described below for both sides.
1. Screw the yoke (1) in until
the threaded rod rests flush
on the inner edge of the
yoke.
2. Screw the yoke out again by
2 turns.
3. Tighten the lock nut (2).
Figure 25: Disengaging the inner yoke
4. Hook the yoke in position
and secure by tightening the
locknut.
Figure 26: Engaging the inner yoke
1 2