KUHN AXIS 20.1, Operator'S Manual

Page: 144 / 216

Spreading Operation B
132
AXIS-GENERAL
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
Spreader feeds more on one side
Hopper empties unevenly during
normal spreading. Fertiliser bridging above the agitator

Remove fertiliser to the height of the protective grid on
the affected side.

Break up accumulated fertiliser with a wooden stick
through the bars of the protective grid.
Outlet blocked

See metering outlet blockages.
Defective agitator

Remove fertiliser to the height of the protective grid on
the affected side.

Open the metering outlet and break up accumulated fer-
tiliser with a wooden stick through the bars of the protec-
tive grid so that the remaining fertiliser can run out of the
outlet opening.

Check functionality of agitator drive. See chapter
9.8: Checking agitator drive, page 190 .
Metering slide set incorrectly

Empty the hopper of remaining fertiliser. See chapter
B.10: Discharging residue, page 134 .

Check metering slide setting. See chapter C.4: Metering
slide adjustment, page 140 .
Irregular fertiliser feed to spread-
ing disc Fertiliser bridging above the agitator

Remove fertiliser to the height of the protective grid on
the affected side.

Break up accumulated fertiliser with a wooden stick
through the bars of the protective grid.
Outlet blocked

See metering outlet blockages.
Defective agitator

Remove fertiliser to the height of the protective grid on
the affected side.

Open the metering outlet and break up accumulated fer-
tiliser with a wooden stick through the bars of the protec-
tive grid so that the remaining fertiliser can run out of the
outlet opening.

Check functionality of agitator drive. See chapter
9.8: Checking agitator drive, page 190 .
Spreading discs flutter

Check that cap nuts are tight and the thread sits properly.
Fault Possible cause/action