KUHN AXIS 20.1, Operator'S Manual

Page: 75 / 216

Standard operating procedure (all models)
63
8
AXIS-GENERAL
Figure 8.21: Calibrating the TELIMAT
A1 Adjustment nut for alphabetic scale
A2 Alphabetic scale for coarse adjustment
B1 Adjustment nut for numeric scale
B2 Numeric scale for fine adjustment
Coarse adjustment (alphabetic scale):
The complete TELIMAT housing can be rotated in tracks around the spreading
disc pivot (alphabetic scale H to Z). The alphabetic scale is used to adjust the
TELIMAT housing according to the fertiliser type, working width and boundary
spreading type (environmentally optimised or yield-optimised boundary spread-
ing).
1. Release adjustment nut for alphabetic scale with the adjustment lever of the
solid fertiliser broadcaster.
2. Move TELIMAT housing (sliding section) to the letter specified in the calibra-
tion chart.
 The arrow is exactly above the specified letter.
3. Tighten adjustment nut with the adjustment lever of the solid fertiliser broad-
caster.
Fine adjustment (number scale):
Guiding plates inside the boundary spreading system can be moved along a
number scale (scale 11 to 15). The number scale is basically used for fine adjust-
ment.
1. Release adjustment nut for numeric scale with the adjustment lever of the sol-
id fertiliser broadcaster.
2. Move guiding plate to the number value specified in the calibration chart.
 The specified number value is precisely aligned with the first guiding plate.
3. Tighten adjustment nut with the adjustment lever of the solid fertiliser broad-
caster.