KUHN AXIS 20.1, Operator'S Manual

Page: 186 / 216

Maintenance and repair C
174
AXIS-GENERAL
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
Standard setting of the outer yoke
1. Disengage the outer yoke at
the left and right adjustment
centres.
2. Screw the yoke (1) in until
the threaded rod rests on the
inner edge of the yoke.
3. Screw the yoke out again by
2 turns.
Do not tighten the lock nut
(2) yet.
Do
not engage the yoke.
Figure 27: Disengaging the outer yoke
4. Set the fertiliser drop point on
both sides by screwing in the
adjustment centre to
posi-
tion 6 .
Figure 28: Setting the drop point to position 6
5. Release the screw under the
pointer using a SW13 span-
ner.
6. Push the pointer forwards to
lock it.
Figure 29: Setting the pointer manually
1 2