KUHN AXIS 20.1, Operator'S Manual

Page: 187 / 216

Maintenance and repair
175
C
AXIS
20.1
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
8. Check:

If this is not the case then the drop point must be readjusted.
7. Attach a suitably thin string
at the
rear in the direction of
travel to the lower sides of
the left and right adjustment
centres as shown, and tau-
ten it.
Figure 30: Attaching the string to the adjust-
ment centre

The triangular marking on
the adjustment centre must
coincide with the tensioned
string.
Figure 31: Markings on the adjustment cen-
tre