KUHN AXIS 20.1, Operator'S Manual

Page: 70 / 216

Standard operating procedure (all models) 8
58
AXIS-GENERAL
Example of boundary spreading during normal fertilisation
(Optional equipment TELIMAT T 25, T 50):
Figure 8.17: Boundary spreading in late fertilisation
Boundary spreading in normal fertilisation refers to a spreading technique in
which a bit more fertiliser lands beyond the boundary of the field. Therefore, there
is just a slight underfertilisation at the field boundary.
The following settings should be applied on the solid fertiliser broadcaster accord-
ing to the spreading calibration chart:
Specified parameters :
Fertiliser type: KAS BASF
Application rate: 150 kg/ha
Working width: 24 m
Ground speed: 12 km/h

Hopper height: 0/6 (A = 0 cm, B = 6 cm)

Fertiliser drop point: 6.5

Metering slide adjustment: 90

Spreading disc type: S4

PTO speed: 540 rpm

TELIMAT settings: S13