KUHN AXIS 20.1, Operator'S Manual

Page: 139 / 216

Spreading Operation
127
B
AXIS
20.1
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
Figure 13: Attach calibration test chute
3. Attach the calibration test chute under the left outlet viewed in the direction of
travel.
4. Set the metering slide stop to the scale value specified in the calibration
charts.
2. Set the drop point to 0 .
Symbol:
n
WARNING
Risk of injury from rotating machine components
Contact with rotating machine components (universal drive shaft,
hubs) may cause bruises, abrasions and crushing injuries. Body
parts or objects may be caught and pulled in.

When the machine is running keep clear of the rotating
hubs.
 If the drive shaft is rotating, always engage the metering
slide from the tractor cab only.

Direct all persons out of the danger zone of the solid ferti-
liser broadcaster before the calibration test.
Kg
1