background image

 

ATS1190 and ATS1192 Smart Card Readers 

Installation Sheet 

EN  DA  DE  ES  FI  FR  IT  NL  NO  PL  PT  SV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1)

(2)

ATS1190

ATS1192

 

 

ATS1190/1

192 

ATS1105 

ATS1170 

Advis

o

r Master

 

ATS1250/1

260 

ATS1250/1

260 

local b

u

Cable 

J2 

J1 

J1 

Door 1, 2, 3, 4 

Comms 

Red 12V 

12V 

12V 

12V 

12V 

Black 0V 0V 0V 

0V 

0V 

Green D0  D0 D

 D0 

D

 

White D1 D1 D+ 

D1 

D+ 

Yellow - 

L2  -  L2 

Brown -  L1  - L1 

Blue -  BZ 

BZ 

Violet -  -  - 

With 4K7 (in series) 
to Alarm Input 3 

EN: Installation Sheet 

Introduction 

The ATS1190/1192 Smart Card Reader is a multifunction, all-
purpose proximity card reader suitable for all locations 
requiring a short-range reader. The reader can be connected 
directly to the ATS Control Panel (see figure 2). It is 
configurable through a Menu system accessible via the BUS or 
by Configuration cards programmed through Titan and the 
Smart Card Programmer (ATS1621/22) or the ATS1481 
Programming card. 

The reader operates from 9 to 14 VDC. It has a quiescent 
current consumption of less than 25 mA and less than 80 mA 
when reading a card. The ATS1190 is supplied standard with a 
white removable dress cover, which can be interchanged with 
one of four other colours available. 

The ATS1192 is a heavy-duty version designed for standard 
door frames. 

Both the ATS1190 and ATS1192 are waterproof. 

Figure 1 legend 

(1) Blue LED: 

Door open 
Disarmed 

(2) Red LED: 

Door open 
Armed 

Mounting 

The reader can be mounted on any flat surface by two pan 
head screws, 3.0 to 3.5 mm diameter, located under the dress 
cover. A slightly reduced range will be experienced when 
mounted on metal surfaces. If mounting in an outdoor 
environment, ensure that the blue LED is at the top. 

It is not recommended to use countersunk screws. 

For the ATS1190 the dress cover can be removed to expose 
the mounting screw by gently prizing the sides away from the 
main body to release the retaining clips and gently pulling on 
the connection cord. Do not use excessive force or the reader 
can be irreparably damaged. 

After mounting, gently press the cover over the main body until 
it locks into place. 

© 2012 UTC Fire & Security. All rights reserved. 

1 / 16 

P/N MAINST-ATS1190 • REV B • ISS 25JAN12 

Reviews: