KUHN AXIS 20.1, Operator'S Manual

Page: 146 / 216

Spreading Operation B
134
AXIS-GENERAL
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
B.10 Discharging residue
We recommend emptying the solid fertiliser broadcaster immediately after every
use to maintain its value. Proceed as with the calibration test to discharge the res-
idue. See
„Running calibration test“ on page 125 .
Instructions for completely discharging the residue:
Small amounts of fertiliser may remain in the solid fertiliser broadcaster when dis-
charging residue normally. If you wish to discharge the residue completely (e.g.
at the end of the season, when changing broadcast material), proceed as follows:
1. Empty hopper until no more material comes out (normal residue discharge).
2. Turn off PTO shaft and tractor motor . Take out tractor ignition key.
3. With the metering slide open move the drop point back and forth (position 0
to 9 and back).
4. Remaining fertiliser should be removed with a soft water spray; see also
„Cleaning“ on page 187 .
n
WARNING
Risk of injury from rotating machine components
Contact with rotating machine components (universal drive shaft,
hubs) may cause bruises, abrasions and crushing injuries. Body
parts or objects may be caught and pulled in.
 When the machine is running keep clear of the rotating
hubs.
 If the drive shaft is rotating, always engage the metering
slide from the tractor cab only.
 Direct all persons out of the danger zone of the solid ferti-
liser broadcaster before the calibration test
Set the drop point to 0 . Symbol:
Kg