KUHN AXIS 20.1, Operator'S Manual

Page: 141 / 216

Spreading Operation
129
B
AXIS
20.1
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
10. End calibration test. Disengage PTO shaft and switch off tractor engine and
lock to prevent unauthorised starting.
11. Mount the spreading discs. Make sure that the left and right spreading discs
are not reversed.
NOTICE
The pins on the spreading disc holders have different positions on the left and
right. The correct spreading disc is the one that fits precisely into the spreading
disc holder.
12. Carefully position cap nut
(do not tilt).
13. Tighten the nut manually
with
25 Nm (hand-tight). Do
not use the adjustment le-
ver.
Figure 15: Screw on cap nuts