KUHN AXIS 20.1, Operator'S Manual

Page: 128 / 216

Spreading Operation B
116
AXIS-GENERAL
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
1. Close metering slide.
2. Determine the position for the scale setting in the calibration charts or based
on the calibration test.
3. Release the retaining screw [2] on the bottom scale of the scale plate [3].
4. Move the pointer [1] of the stop to the determined position.
5. Tighten the retaining screw.
Figure 3: Scale for setting the spreading quantity
[1] Pointer stop
[2] Retaining screw
[3] Lower scale of the scale plate