KUHN AXIS 20.1, Operator'S Manual

Page: 184 / 216

Maintenance and repair C
172
AXIS-GENERAL
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
Checking the standard setting of the toothed segments
1.
Remove the protection devices from the setting unit (5) by undoing the 2
screws.
2. There are markings on the underside of the toothed segments.
 These must coincide (see figure 22 and figure 23 ).
Figure 22: Position of the markings on the toothed segments
Figure 23: Underside of the toothed elements: markings must coincide
3. After checking or adjusting, refit the protection device.