KUHN AXIS 20.1, Operator'S Manual

Page: 78 / 216

Standard operating procedure (all models) 8
66
AXIS-GENERAL
8. 10 Adjustments for unlisted fertiliser types
The settings for fertiliser types not listed in the calibration charts can be calculated
with the practice test kit (optional).
To check the spreader settings quickly we recommend layout for one pass .
For more precise calculation of the spreader settings we recommend the layout
for three passes .
8.10.1 Requirements and conditions

Conduct the test on a dry day with no wind so the weather will not influ-
ence the result.

We recommend an area that is horizontal in both directions as the test area.
The tracks must
not have any significant cavities or heights , because this
may distort the spreading pattern.

Run the test either on a freshly cut field or on low growth (max.10 cm).
NOTICE
See also the supplementary manual for the practice test kit to calculate settings
for unlisted fertiliser types.
NOTICE
The requirements and conditions apply for both one pass and three passes.
Observe these conditions to ensure that the results are as accurate as possible.