KUHN AXIS 20.1, Operator'S Manual

Page: 69 / 216

Standard operating procedure (all models)
57
8
AXIS-GENERAL
Example of boundary spreading during late fertilisation
(Optional equipment TELIMAT T 25, T 50):
Figure 8.16: Border spreading in late fertilisation
During border spreading in normal fertilisation, almost no fertiliser goes beyond
the field boundary. Underfertilisation at the field boundary must be accepted in
this case.
The following settings should be applied on the solid fertiliser broadcaster accord-
ing to the spreading calibration chart:
Specified parameters :
Fertiliser type: KAS BASF
Application rate: 150 kg/ha
Working width: 24 m
Ground speed: 12 km/h

Hopper height: 0/6 (A = 0 cm, B = 6 cm)

Fertiliser drop point: 6.5

Metering slide adjustment: 90 left, 72 right
1
1. recommended volume reduction of 20% on boundary spreading side

Spreading disc type: S4

PTO speed: 540 rpm

TELIMAT settings: K12.5