KUHN AXIS 20.1, Operator'S Manual

Page: 77 / 216

Standard operating procedure (all models)
65
8
AXIS-GENERAL
Mechanical display of the spreading position
The mechanical display of the spreading position is located directly at the right
side of the TELIMAT relative to the direction of travel. The display can be seen
from the driver's cab on the tractor.
Figure 8.22: TELIMAT mechanical display
[A] Boundary spreading position
[B] Normal spreading position
NOTICE
When the TELIMAT is in the lower position (boundary spreading), leakage in
older control units may result in the TELIMAT moving away from the end posi-
tion. Therefore, please return the TELIMAT to the end position at regular inter-
vals to prevent spreading errors.
A
B