KUHN AXIS 20.1, Operator'S Manual

Page: 162 / 216

Spreading operation B
150
AXIS-GENERAL
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
B.5.2 Removing and mounting spreading discs
Removing spreading discs
n
DANGER
Danger from running engine
Working on the solid fertiliser broadcaster with the engine running
can lead to serious injuries caused by mechanical components or
escaping fertiliser.
Never remove or mount the spreading discs with the tractor
engine running or the PTO shaft rotating.
 Shut off the tractor engine and disengage the PTO shaft.
Remove the ignition key.
NOTICE
The disc adjustment lever is located, depending on spreader model , in one
of the two positions shown below.
[1] Adjustment lever (left accord-
ing to direction of travel)
Figure 2: Adjustment lever
[1] Adjustment lever (rear accord-
ing to direction of travel)
Figure 3: Adjustment lever
1
1