KUHN AXIS 20.1, Operator'S Manual

Page: 47 / 216

Instructions regarding the spreading process
35
7
AXIS-GENERAL
7 Instructions regarding the spreading process
The intended use of the solid fertiliser broadcaster includes compliance with the
operating, maintenance and service conditions according to manufacturer spec-
ifications.
Spreading therefore always includes the work of preparation and
cleaning/maintenance .

Conduct spreading as described below.
Preparation

Attach spreader to tractor page 42

Close metering slide

Preset the mounting height page 46

Fill hopper Chapter A.2 or Chapter A.3
1
1. See the solid fertiliser broadcaster register (AXIS 20.1, AXIS 30.1/40.1 or AXIS 50.1 W)

Set application rate Chapter B.2
1

Setting the working width
-
Choosing the correct spreading disc
- Set fertiliser drop point
Chapter B.5
1
Chapter B.5.3
1
Spreading

Travel to the spreading location

Check mounting height

Engage PTO shaft

Open slide and start spreading

Finish spreading run and close the outlets

Disengage PTO shaft

Discharge residue Chapter B.10
1
Cleaning/maintenance

Open metering slide

Unhitch spreader from tractor

Maintenance and lubrication Chapter C
1
and AXIS-Main-
tenance