A-63054 February 2004
3A-27
Upon startup, Capture Software automatically locates the scanner and fills
in the adapter number and SCSI ID of the scanner. If the scanner was not
ready or powered up when Capture Software was started, press the
Find
SCSI Address
button to locate the scanner and fill in the fields if the
scanner is available. To key in the adapter number or SCSI ID manually,
the following applies:
• If the scanning PC contains more than one SCSI adapter, enter the
appropriate adapter number in the Adapter number field, otherwise, leave
the adapter number to its default value of 0.
• Enter the SCSI ID number of the attached scanner, usually a number from
1 to 7.
For the Scanner 1500 and Scanner 2500, the SCSI ID number is visible in
the LCD display on the front of the scanner. Press the down arrow on the
display panel until the SCSI ID appears in the LCD display.
For the Scanner 3500, Scanner 3510, Scanner 3520, Color Scanner 3590C,
and Color Scanner 4500, the SCSI ID number is visible in the small box on
the back panel of the scanner.
The
Emulation mode
check box is used to enable/disable running
Capture Software in emulation mode without an attached scanner. For
more information on the Emulation mode check box, refer to Appendix A,
Installation
.
NOTE: If the SCSI Address or Emulation mode settings are changed, you may
need to exit and restart Capture Software in order to scan successfully.
4. Press the
About
button to display information about the attached scanner.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
