A-63054 February 2004
1-5
• 128 MB of RAM
- For color scanning with the i50 Scanner, i60 Scanner, or i80 Scanner,
256 MB of RAM is recommended.
- For color scanning with the i200 Series Scanners, 512 MB of RAM is
recommended.
- For color scanning with the i820 Scanner or i840 Scanner, 512 MB of
RAM is recommended.
• SCSI controller
- An Adaptec 2940 controller is recommended. You can also use an
Adaptec 1542CP controller. Newer SCSI cards such as the Adaptec
19160 or 29160 may also be used.
- For the i800 Series Scanners, an Adaptec 29160 SCSI controller or
equivalent (Ultra-Wide2 SCSI) is required.
• IEEE-1394 (FireWire) controller
For the i200 Series Scanners, a plug-and-play IEEE-1394 (FireWire)
interface is required. Use only the FireWire card and cable that is supplied
with the i200 Series Scanner.
IMPORTANT: The i200 Series Scanner should be the only item plugged in to
the IEEE-1394 (FireWire) card on the host computer.
• Parallel/printer port (with DB25 female connector) for hardware
key installation.
USB ports are not supported.
• Display monitor and graphic controller
Most high-quality displays and graphic controllers are acceptable.
The display resolution should be set to at least 800 x 600.
- For black-and-white scanning, the display monitor should be set to at
least 256 Colors. For color scanning with the Kodak color scanners, set
the display monitor to True Color (24 bit or 16 million colors).
- For color scanning with the i820 Scanner and i840 Scanner, an
AGP (Advanced Graphics Processor) video card with 32 MB of
video RAM is recommended.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
