A-63054 February 2004
4-23
Start of batch function
—specify the action the scanner will take when a new
batch is started. Possible actions:
Attach to current document
—the scanner image address level is set to
Level 1. The next page scanned will be attached to the current Capture
Software document.
Create new document
—the scanner image address level is set to
Level 2. The next page scanned will create a new document within
Capture Software.
Create new batch
—the scanner image address is set to Level 3. The next
page scanned will create a new batch within Capture Software.
End of batch function
—specify the action the scanner will take when a batch
has been completed. Possible actions are:
Stop feeder
—the scanner feeder is stopped but the scanner remains
enabled. To resume scanning, press the Green button on the scanner
operator control panel.
Stop feeder and transport
—the scanner feeder and transport are
stopped and the scanner is disabled. Scanning must be resumed from
within Capture Software.
Continue scanning and start a new batch
—the scanner continues to run
and the Start of batch function is automatically performed.
Patch tab
The Patch tab allows you to enable/disable patch code reading in the scanner
for all of the patch code types supported by the scanner. When patch code
reading is enabled in the scanner, software patch code reading in Capture
Software is not allowed. Conversely, when software patch code reading is
enabled in Capture Software, hardware patch code reading in the scanner may
not be defined.
Click on the
Enable in scanner
check box to define hardware patch
code reading.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
