A-63054 February 2004
3B-23
Setting up the scanner
You can set up or change the parameters of the scanner you will be using by
accessing the Setup dialog box.
1. Select
Scanner>Setup
.
The Scanner Setup dialog box appears.
A check in the
Energy saver mode
box indicates that automatic lamp shutoff is
enabled. Specify the time that the scanner will wait after the last scan operation
before it shuts off the lamps. Valid values are 1 to 60 minutes.
The
Emulation mode
check box is used to enable/disable running
Capture Software in emulation mode without an attached scanner. For more
information on the Emulation mode check box, refer to Appendix A,
Installation
.
NOTE: If the Emulation mode setting is changed, you may need to exit and
restart Capture Software in order to scan successfully.
2. Press the
About
button to display information about the attached scanner.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
