A-63054 February 2004
3A-25
Additional menu options
for high volume scanners
For high volume scanners, such as Scanner 5500, Scanner 7520,
Scanner 9520, or the i800 Series Scanners, two additional menu options
can be selected.
Set Mode
—accesses the Set Mode dialog box which allows you to change the
scanning mode on the high volume scanner. If the mode selected is a linked
mode to the current mode (as defined by the scanner), then the image address
will not change. However, if the mode selected is not linked to the current
scanner, then the image address will change to the last address used for
the mode.
NOTES: It is recommended that you always change the mode within Capture
Software, as opposed to changing the mode at the scanner keypad
(i.e., using the F01 function). If you change the mode at the scanner
keypad, you may not be able to restart the scanner in Capture
Software due to a mismatch in the expected Image Address format
between the scanner and Capture Software.,
Set Mode is not available for the i800 Series Scanners which only
support one operative mode configurable in Application Setup.
Set Image Address
—accesses the Set Image Address dialog box which
allows you to change the image address that is displayed on the high volume
scanner (and optionally printed). Only those image address fields (e.g., Fixed
field, Level 2) that are applicable to the scanner mode being used can be
modified. By default, Capture Software suggests an image address based
upon the Application Setup that resynchronizes the current Capture Software
document number with the scanner image address.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
