A-63054 February 2004
9A-15
13. Select the
Pixel-precision for auto-rotation
check box if desired.
When the page setup is configured to do auto-rotation and color scanning,
then this check box becomes available. When enabled, color image auto-
rotation should be very precise and should not result in any residual black
border showing up in the auto-rotated images that may appear if pixel-
precision were disabled.
NOTES: Auto-rotation is more accurate with pixel-precision enabled, but it
is slower than when pixel-precision is disabled.
When fine cropping for color images is enabled, pixel-precision is
automatically enabled, as fine cropping for color images is always
a pixel-precise operation.
IMPORTANT: When
color scanning
and performing auto-rotation, the
performance and throughput of Capture Software may
decrease significantly depending on the speed of the processor
on your host PC. You may actually achieve better overall
throughput by scanning in portrait mode so as to avoid having
to perform auto-rotation on color images.
14. Select either
Classic
or
Calendar
duplex mode.
See the section entitled “About Duplex modes” in Chapter 3,
Working in
Capture Software
, for more information.
NOTE: Calendar duplex mode is not available for color scanning.
15. Select an auto-rotate option if desired.
The straight arrow disables auto-rotation. Pages can be rotated 90° (
),
180° (
), or 270° (
) before storing them.
In cases where any bar codes are defined, the rotation of the page
template is first applied, then the bar code is located, then the rotation
according to the bar code is applied. The bar code determines the
final rotation.
16. Set any front or rear image setup options.
Capture Software allows different image setups for
front
and
rear
sides of a
page for both color and bitonal (black and white) scanning.
To set the front or rear options:
Check the
Bi-tonal front
,
Bi-tonal rear
,
Color front
, or
Color rear
check box.
• Select the desired image setup for the selected front and rear sides from
the drop-down list box.
• If you want to create a new image setup or modify the one selected,
click
Setup
. The Image Setup dialog box appears.
• Select the desired options on the
Filters
,
Check
,
Mask
, and
Color
Dropout
tabs.
• Click
OK
on each tab when you are finished setting options.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
