A-63054 February 2004
9A-5
11. If required, enable the
Swap Front and Rear
check box to automatically
swap the front and rear images of a page immediately after scanning.
This option is useful when pages are scanned with the rear side up on
purpose (e.g., rear side is carbon-backed, which would contaminate the
feeder rollers if scanned front side up.)
NOTES: When you scan in simplex mode, the
Swap Front and Rear
option will cause an error during scanning. Disable the Swap
Front and Rear option when you scan in simplex mode.
Swap Front and Rear
is not available when scanning with the
Color Scanner 4500.
When binarizing color images when scanning with the Color
Scanner 3590C, using
Swap Front and Rear
causes
unpredictable results. Disable the Swap Front and Rear option
when binarizing color images.
12. Select any merge and split options.
See the section entitled “Using the Merge and Split options” for setting up
and using these options.
NOTE: The merge and split options are not available when scanning with
the Color Scanner 4500.
13. Specify any additional page properties for the attached scanner.
See the section entitled “Scanner-specific page properties” for
more information.
14. Click
OK
when you are finished selecting all options.
NOTE: The
Delete
button deletes the selected page setup and removes it
from the list of page setups.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
