A-63054 February 2004
4-71
When producing a document index file, an image index file can optionally be
produced. By default, it is named IMAGES.DAT and is located in the same
subdirectory as the images. The image index file contains one entry for each
image in the batch. Since Capture Software does not yet support page- or
image-level indexing, this option may only be useful for High Volume
Capture Software (HVCS) users. When you use HVCS with a Scanner 5500,
Scanner 7500, or Scanner 9500 installed with the Bar Code Accessory, the
image index file will contain image address and bar code information for each
image scanned.
When producing a document index file, and optionally an image index file, the
format of the index files can optionally be produced in HVCS 16-bit (Version
2.x) format. This option can facilitate the upgrade from HVCS 16-bit to Capture
Software 32-bit by keeping the batch output produced for the target imaging
system unchanged.
Add leading zeroes to image file names
—when enabled, Capture Software
produces TIFF image files with eight-character names, padded with leading
zeroes. Otherwise, image file names are sequentially numbered without
leading zeroes. By default, adding leading zeroes is enabled. For example:
Create one folder per document
—when enabled, Capture Software
produces a subdirectory of TIFF image files for each document in the batch.
The name of the subdirectory will be the Capture Software document number.
If document numbers are incremented across batches, then the document
subdirectory names are also incremented across batches. If
Add leading
zeroes to image file names
is enabled, then the document subdirectory
names will also be padded with leading zeroes. The image file names in the
document subdirectory always start at 00000001.TIF (or 1.TIF) and are
sequentially incremented.
When disabled, Capture Software produces a sequential range of single-page
TIFF files per batch in the batch subdirectory. The document index file
indicates the starting and ending image numbers for each document. The
starting image sequence number for the processed batch depends on the
Image numbering starts from
setting. This setting is available only when
document folders are disabled. The starting image sequence can be between
0 or 1 or can be incremented across batches. The default is a starting image
number of 1.
Add Leading Zeroes
Image File Name
Enabled
00000001.TIF
00000002.TIF
00000003.TIF
.
.
.
Disabled
1.TIF
2.TIF
3.TIF
.
.
.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
