1-4
A-63054 February 2004
System requirements
Following are the minimum software and hardware requirements to run
Capture Software.
Software
All systems require Windows 98, Windows Me, Windows NT 4.0, Windows
2000, or Windows XP.
NOTE: The i200 Series Scanners are only supported under Windows 98SE,
Windows Me, Windows 2000, and Windows XP.
Hardware
• IBM PC (or compatible) with a Pentium 667 MHz processor (minimum)
Choosing the right processor is important. When the microprocessor is too
slow, your PC cannot keep up with the scanner’s speed, and overall
productivity decreases. See the following table for the processor required for
optimal scanning in certain scanning modes.
*
For color and grayscale scanning, the PC must have MMX processing
capability and an Intel-based Pentium processor is recommended.
NOTE: If you plan to use the deskew, auto-crop, and auto-rotate features
when color scanning in Capture Software, the fastest microprocessor
available (currently the Pentium IV 2.5 GHz) is recommended.
• 1 GB (<10 msec) hard disk
For color scanning with the i820 Scanner or i840 Scanner, two (2) SCSI
hard disk drives are recommended: one for the operating system and one
for storing the scanned images. Much more disk space will likely be required
for scanned image storage.
Scanner Model
Scanning Mode
Processor Required
i50 Scanner
i60 Scanner
i80 Scanner
Black and white
Pentium 667 MHz
Grayscale
Pentium 1 GHz*
Color
Pentium 1 GHz*
i250 Scanner
i260 Scanner
i280 Scanner
Black and white
Pentium 2.5 GHz
Grayscale
Pentium 2.5 GHz*
Color
Pentium 2.5 GHz*
Color Scanner 3590C
Color Scanner 4500
Color
Pentium 1 GHz*
i820 Scanner
i840 Scanner
Color
Pentium 1.5 GHz*
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
