Kodak 8342693 - Capture Software - PC, User Manual

Page: 190 / 412

A-63054 February 2004 4-17
Set image address on new batch —enable this option to set the image
address value when a new batch is manually created in Capture Software.
This option does not affect the image address when batches are automatically
created in Capture Software (e.g., blank page separation, bar code
separation). By default, the image address default value for a new batch
will be as follows:
Fixed field —the default value as defined in this dialog.
Level 3 —the batch number portion of the Capture Software batch name
(e.g., a value of 19 if the batch name is Batch019).
Level 2 —Capture Software document number for the first document in
the batch.
Level 1 —0 if the image address format is Level 2 or Level 3. 1 if the image
address format is Level 1.
In addition, with sufficient privileges, the user will have the opportunity to
override the default image address value when the batch is created.
Set image address at scanner start —enable this option to automatically
resynchronize the scanner image address with the current scan batch in
Capture Software every time the scanner is started. The image address
value is set to what the image address should be for the next scanned page.
This option is only available when Set image address on new batch is enabled.
When the scanner image address is resynchronized, the image address fields
will be set to the following:
Fixed field —will not change from the current scanner value.
Level 3 —the batch number portion of the Capture Software batch name.
Level 2 —the current Capture Software document number.
Level 1 —the number of pages in the current document if the image
address format is Level 2 or Level 3. Number of pages in the current
do 1 if the image address format is Level 1.
NOTES: When dual-stream scanning (both color and b-tonal scanning
simultaneously), Set image address at scanner start is not
recommended. This is because the number of pages in the
current document is not correctly maintained by Capture Software
when dual-stream scanning. As a result, the Level 1 portion of the
image address can easily get out of sync.
When Set image address at scanner start is enabled, the Set Image
Address option in the Scanner Menu becomes ineffective. This is
because any change in the image address made by Set Image
Address will be overridden once the scanner is restarted.
New batch starts with counter equal to —enable this option to set the
Sequential Counter inside the scanner whenever a batch is manually created
in Capture Software. This option does not affect the Sequential Counter when
batches are automatically created in Capture Software (e.g., blank page
separation, bar code separation). When enabled, specify the starting value.
Display/print format —specify the format of the image address fields
whenever the image address is displayed on the scanner operator control
panel or printed on a scanned page. Possible options are Display leading
zeroes (i.e., pad with zeroes), Display leading blanks (i.e., pad with spaces),
or No padding.