Kodak 8342693 - Capture Software - PC, User Manual

Page: 49 / 412

3A-24 A-63054 February 2004
Scanner menu
The Scanner menu provides the following functions:
Setup —accesses the Setup dialog box specific to the scanner you selected.
From this dialog box you can set the SCSI parameters and other specific
parameters for the selected scanner.
Stop —clears and stops the transport and disables the scanner. Keyboard
shortcut: F6
Start —enables the scanner and starts the transport. Keyboard shortcut: F7
Image Calibration —allows you to calibrate the scanner. You may need to
calibrate the scanner if you are experiencing problems with image quality.
NOTE: This function is only available in Capture Software for the Scanner
3500, Scanner 3510, Scanner 3520, Color Scanner 3590C, Color
Scanner 4500, and all i800 Series Scanners.
Color Calibration —allows you to calibrate the Color Scanner 3590C or Color
Scanner 4500 for color image quality.
NOTE: This function is only available in Capture Software for the Color
Scanner 3590C or Color Scanner 4500.
Multi-feed Thickness Calibration —allows you to calibrate the scanner for
multi-feed document detection based on the thickness of a scanned sheet of
paper. When prompted, feed a sample sheet into the scanner. When Multi-
feed Thickness Detection is actuated after calibration, the scanner warns you
with an audible alarm whenever a scanned sheet of paper is detected to be
thicker (commonly caused by a multi-feed) than the sheet used for calibration.
See Chapter 9,
Page Setup , for information about actuating Multi-feed
Thickness Detection.
NOTE: This function is only available in Capture Software for the Scanner
3500, Scanner 3510, Scanner 3520, Color Scanner 3590C, or Color
Scanner 4500.
Set Counter —accesses the Set Counter dialog box which allows you to
change the sequential counter value assigned (and optionally printed) to the
next page scanned. On the Scanner 1500 and Scanner 2500, the counter
value that is entered will appear on the LCD display.
NOTE: This function is only available in Capture Software for the Scanner
1500, Scanner 2500, Scanner 3520DP, Color Scanner 4500DP, and all
i800 Series Scanners.