6-20
A-63054 February 2004
Displaying bar code
values
Bar code/OCR values can be displayed by selecting the
Test All Bar Code
and OCR Zones
button
or the
Test Selected Bar Code and OCR Zones
button
on the Button bar. When you select this option, Capture Software
attempts to read all bar code/OCR zones defined for a bar code/OCR value. If
any bar codes/OCR text are found, the Bar Code Value window appears.
The Bar Code Value window shows the following information about each
bar code:
•
Label
of the bar code zone.
•
Type
of bar code found in the zone.
If the zone is an OCR zone, Type will be OCR.
•
Confidence
level (in a percentage) of the bar code value found.
•
Orientation
of the bar code (with 0 degrees representing a horizontal and
right-side up bar code).
•
Value
of the bar code/OCR text.
•
X
and
Y
coordinates of the upper left corner of the bar code/OCR zone.
The coordinates are in 1/100 of an inch and represent the distance of the
zone from the upper left corner of the image.
•
Width
and
Height
of the bar code/OCR zone in units of 1/100 of an inch.
NOTE: If a bar code/OCR value cannot be found for a zone, the zone
is still included in the value list with only the Label and zone
coordinates displayed.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
