9A-4
A-63054 February 2004
8. If desired, enable the
Maximum skew allowed
check box and enter the
allowed degree of skew (1 to 15 degrees).
When this option is enabled, the scanner stops and a message appears
when the degree of skew exceeds the maximum level regardless of
whether the
Stop scanner on error
option in the Application Setup is
enabled or disabled.
NOTES: The
Maximum skew allowed
option is not available when you
are scanning with a scanner equipped with Document Image
Manager (deskew is performed by the scanner during scanning).
Maximum skew allowed
is not yet functional on color images
and therefore cannot be used when scanning with a Color
Scanner 4500.
9. Select the
Overcrop
check box to remove or append additional pixels to
all sides of an auto-cropped image. Enter the amount of overcrop in pixels
(-15 to 15).
After deskew and auto-crop, a small black border may still remain on
portions of the images. Overcrop can completely remove any remaining
black border.
NOTES: A negative overcrop value will add pixels to each image.
Overcrop
is not yet functional on color images.
10. Set any front or rear image setup options. Capture Software allows
different image setups for
front
and
rear
sides of a page.
To set the front or rear options:
Check the
Front
(or
Rear
) check box.
• Select the desired image setup for both front and rear sides from the
drop-down list box.
• If you want to create a new image setup or modify the one selected,
click
Setup
. The Image Setup dialog box appears.
• Select the desired options on the
Filters
,
Check
and
Mask
tabs.
• Click
OK
on each tab when you are finished setting options.
For complete details on image setup, see the section entitled “Using
Image Setup.”
NOTE: When scanning from the Scanner 1500 flatbed, the Front image
setup is used.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
