A-63054 February 2004
9A-35
Draw mask
—opens a scan window. Scan one page and draw a mask on the
image and click OK. Capture Software automatically calculates the mask
parameters and enters the value in the Left, Top, Width, and Height fields.
Depending on whether you are setting up the front/rear or bitonal/color
images, Capture Software displays the appropriate image coming from
the scanner.
To draw a mask:
1. Click on the
Draw
button in the Mask tab.
The Image Mask window appears.
2. Select
Scan
to show the image in which to apply the mask.
3. Using the mouse pointer, draw a rectangle over the area where you want
the mask to be applied.
4. Click
OK
.
Overscan
—allows you to add a specified value (in 1/100 in.) before and after
the top and bottom edge of the image. Overscan is used in applications where
automatic feeding of highly skewed documents is likely. Overscan reduces the
possibility of corner clipping on skewed images.
A value from 0 to 35 may be specified. The default Overscan value is 0.
The combined Overscan and Height values cannot exceed 30 inches for all
resolutions except 400 dpi bitonal which cannot exceed 26 in.
Summary of Contents for 8342693 - Capture Software - PC
Page 1: ...Capture Software User s Guide A 63054...
Page 3: ......
