Kodak 8342693 - Capture Software - PC, User Manual

Page: 191 / 412

4-18 A-63054 February 2004
Printer tab The Printer tab allows you to define what gets printed on each scanned page,
where printing will occur, and the format in which printing will be done.
The i800 Series Scanners include a built-in document printer for the front of
each scanned page. Select
None to completely disable printing. To enable
printing, select one of the four font/orientation options by clicking on the
appropriate radio button:
Start position —specify how far down vertically on the page printing will begin.
The start position is specified in units of 1/100 of an inch. The start position
must begin at least ½” from the lead edge of the page. Allowable values are
between 50 (1/2”) and 2950.
The horizontal position across the page must be set on the document printer
unit inside the scanner. You cannot specify the horizontal position within
Capture Software.
Counter length —allows you to specify how many digits of the counter you
want to print when printing the scanner’s sequential page counter. The counter
is a 9-digit number and you can select to print anywhere from 1 to 9 digits.
If the counter value inside the scanner is greater than the number of digits
specified, then the scanner will report a “Sequential Counter Overflow” error
and scanning will be stopped.
Counter format —allows you to specify a format when printing the counter.
Possible options are Display leading zeroes (i.e., pad with zeroes), Display
leading blanks (i.e., pad with spaces), or No padding.
For example, if the counter value inside the scanner is 26 and the counter
length is 4 and the counter format is Display leading zeroes, then the counter
printed on the scanned page will be
0026 .