Kinova Link 6 User Manual Download Page 64

Page: 64 / 296

EN UG-020 Link 6 user guide r1.0

List of safety functions

on page 52

Status of safety functions

on page 222

SF07 TCP and elbow speed monitoring

What does SF07 monitor?

SF07 monitors the

, which is the third joint,so that the

speeds do not exceed the values set in the

TCP & Elbow Limits

page.

Cause of the trigger

• A large force is exerted on the robot during Hand Guiding mode, causing the speed of the

TCP

or elbow to increase.

• Joint commands, especially on the first joint, reach large angular speeds.
It results in a

stop category

Remedy

• Apply constraints on local motion to limit the joint speeds and to keep the joint speeds within

safe values.

• Modify the trajectory to include more waypoints such that the end effector and the elbow

cannot reach high velocities.

Related topics

Mode: Hand Guiding

on page 102

Tool center point limits

on page 68

Elbow limits

on page 69

List of safety functions

on page 52

Status of safety functions

on page 222

Stopping time and distance

Stopping times and distances in accordance with ISO 10218-1:2011 are available upon request

from Kinova Support.

Diagnostic coverage

Link 6 continually monitors itself and all diagnostics are displayed in

Kortex Web App

All safety functions are monitored. The state of each part that makes the

arm

work are also

monitored. Problems encountered, with respect to safety functions of the arm, are displayed on

the

Status

pages. The problems must be resolved before the robot can move again.

General and detailed information about the

positions are

displayed on the

Monitoring

pages.

Related topics

Diagnostics

on page 221

Status of safety functions

on page 222

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands