Kinova Link 6 User Manual Download Page 203

Page: 203 / 296

EN UG-020 Link 6 user guide r1.0

195

Item

Description

Speed Limits

Joint 1

Joint 2

Joint 3

Drag the slider to, or enter, the desired speed at the joint

at the selected waypoint.

Minimum: 1 °/s
Maximum: 200 °/s.

Important:

The desired speed cannot

exceed the Safety Joint Speed Limit defined

Safety

Joint Limits

Joint 4

Joint 5

Joint 6

Drag the slider to, or enter, the desired speed at the joint

at the selected waypoint.

Minimum: 1 °/s
Maximum: 320 °/s

Important:

The desired speed cannot

exceed the Safety Joint Speed Limit defined

Safety

Joint Limits

Use waypoint-specific acceleration limits

Select when you want to set a specific speed limit on

the robot at the selected waypoint instead of using the

parametric values shared among all waypoints in the

list.

The

Acceleration Limits

sub-pane launches.

Acceleration Limits

for

Joint 1

Joint 2

Joint 3

Joint 4

Joint 5

Joint 6

Drag the slider to, or enter, the desired acceleration at

each joint for the selected waypoint.

Minimum: 1 °/s

Maximum: 600°/s

Constraint parameters

Each

Waypoints

tile can have its own set of global speed and acceleration limits.

The global speed and acceleration limits do not apply to the waypoints that have waypoint-

specific speed and acceleration limits defined on the

Constraints

pane.

The constraints available depend on the type of waypoint: Cartesian or angular.

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands