Kinova Link 6 User Manual Download Page 79

Page: 79 / 296

EN UG-020 Link 6 user guide r1.0

Figure 55: Initial launch of Protection Zones page

Related topics

Effective workspace

on page 13

List of safety functions

on page 52

Tool sphere

The tool sphere, displayed in the

Protection Zones

page, is a

. The tool sphere is the only protection zone that can move.

The end effector and the arm must never collide with each other. Therefore, the tool sphere

is always displayed in the

Protection Zones

page. It can never be deleted and it can never be

deactivated. However, the zone of the tool sphere can be modified.

Important:

Always make sure the tool sphere size and offset reflect reality.

Zones pane

Create, rename, duplicate, and delete zones from the Zones pane. Export individual protection

zones as XML or JSON from a web browser.
The zone for the

end effector

is always present; in the pane, it is listed as the

Tool Sphere

Important:

The zone defined for the tool is the only zone that cannot be deleted. It must

exist so that the robot takes the shape and offset of the end effector into account.

Protection zones

that are already defined are listed in the

Protection Zones

pane..

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands