Kinova Link 6 User Manual Download Page 60

Page: 60 / 296

EN UG-020 Link 6 user guide r1.0

Warning:

Backdriving the actuators more than 360 ° may damage the robot and internal

cables. Depending on the position of the robot, damage may occur when the movement is

less than 360 °.

Warning:

Backdriving the actuators may require the arm to be reprogrammed.

CAUTION:

Backdriving the actuators manually may damage the brakes.

Related topics

Safety directives and warnings

on page 46

Safety functions

Link 6 has built-in tools designed to help the

integrator

to reduce risk when performing the risk

analysis.
The tools are also known as safety functions. They rely on the hardware, firmware, the

SCU

electronics, sensors, and other elements of the robot.

List of safety functions

Safety functions are built into Link 6 to minimize hazards in the robot system.

Table 37: List of safety functions

Number

Name

Triggers stop category

Level of performance

SF01

Emergency stop

SC1

PLd

SF02

Protective stop

SC2

PLd

SF03

Joint position

SC2

PLd

SF04

Joint speed

SC2

PLd

SF05

Monitored stop

SC0

PLd

SF06

Protection zone

SC2

PLd

SF07

Tool Center Point (TCP)

Elbow

speed

SC2

PLd

Related topics

Stop categories

on page 51

Safety modes

on page 57

Robot safety protections and limits

on page 66

Protection zones

on page 69

Status of safety functions

on page 222

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands