Kinova Link 6 User Manual Download Page 121

Page: 121 / 296

EN UG-020 Link 6 user guide r1.0

113

• 4 x M8 socket head cap screws, grade 12.9 steel

Note:

Torque: 20 N·m

Note:

An equivalent imperial 5/16 in screw with equal or better mechanical properties

and underhead contact patch can be used.

• 2 x 8 mm dowels

About this task

The arm is in a flat packaging pose to minimize the amount of space it takes in its packaging.

This packaging pose also eases installation.

Procedure

Define the location and prepare the surface according to the mounting pattern drawing.

1 - Dowel hole feature for optional dowel pins; 2 - Front; 3 - Back

Place the arm on the surface with the holes of the

base

lining up with the holes of the surface.

Secure the base with 5 mm hex key according to the hardware requirement.

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands