EN UG-020 Link 6 user guide r1.0
209
Item
Description
Settings (X)
Name
Displays the names of the available outputs of the
chosen type as defined by the Industrial I/O plugin
configuration.
When the
Output Type
is digital, the state is either
High
or
Low
.
State
When the
Output Type
is analog, there is no
State
.
However, there is a value.
Output unit
The unit depends on the Industrial I/O plugin
configuration.
Industrial I/O: Wait for Input tile parameters
The
Wait for Input
tile is an Industrial I/O tile. When you drag it into an available tile in the
Sequence editor
pane, the
Tile configuration
pane changes dynamically to expose the entities of
Wait for Input
that can be configured.
Use
Wait for Input
to pause a program untila signal is sent on an industrial input channel.
Figure 169: The Tile configuration pane when Wait for Input is the current tile and the Input
Type is Digital
Table 88: Industrial I/O Wait For Input parameters
Item
Description
Wait Input (X)
Input Type
Select one of the available set output types.
•
Digital
•
Analog
•
Wrist digital
•
Wrist analog
Timeout (ms)
Force the program to stop running if it must wait the
number of milliseconds entered.
Settings (X)
Name
Dispalys the names of the available inputs of
the chosen type as defined by the I/O plugin
configuration.
+1 514-277-3777
kinovarobotics.com
© 2022 Kinova inc. All rights reserved.
Summary of Contents for Link 6
Page 1: ...Link 6 user guide Optional gripper shown ...
Page 8: ......
