EN UG-020 Link 6 user guide r1.0
185
Table 71: Tiles
Tile
Tile name
Description
Matrix
Define a matrix of positions.
Waypoints
Create a list of waypoints in the program.
Remember:
Each list must be all
.
Important:
Aside from the core tiles, each installed
may have its own set of
tiles. These additional tiles are displayed in the same area as the core actions to ease
programming.
Each core tile has its own set of variables that must be defined in the
Tile configuration
pane.
Common core parameters in the Tile Configuration pane
The
Tile configuration
pane changes dynamically, depending on which tile is dragged into the
Sequence editor
pane.
The content of the
Tile configuration
pane changes dynamically with the selected tile. However,
there are a few parameters that remain the same for all tiles.
Figure 151: Common parameters in the Tile Configuration pane
Table 72: Entities common to all core tiles
Item
Description
Action Name
Enter a meaningful name for the currently selected tile.
Output Results To Variable
Output results of a variable that is selected for the currently
selected tile.
Note:
Not all tiles have any information for this
field.
(X)
Tap to launch the
Select Variable
page. Select and modify, or
create a variable.
Note:
Not all tiles can select a variable. It is used
for the Industrial I/O tiles.
Play the selected tile when you are in Hold-to-Run mode. It
launches
Variables use by action
, where you can modify
values, if necessary, before playing tapping
PLAY
.
+1 514-277-3777
kinovarobotics.com
© 2022 Kinova inc. All rights reserved.
Summary of Contents for Link 6
Page 1: ...Link 6 user guide Optional gripper shown ...
Page 8: ......
