Kinova Link 6 User Manual Download Page 159

Page: 159 / 296

EN UG-020 Link 6 user guide r1.0

151

Conﬁguring tools

All tools need to be configured before they are used.

About this task

All tool configuration tasks are accessed by tapping

Systems

Tools

Tip:

Before you can edit the active tools, the robot must be switched on and it must be in

Monitored Stopmode.

Figure 118: Accessing tool configuration operations

Procedure

Tap

Systems

Tools

The

Tools

page launches.

The tools are listed on the left side in two groupings:

Active

and

Inactive

. The

flange

is always

listed in the

Active

tools list because all tools are attached to it.

The center is a 3D view of the arm that can be moved around to help you visualize the tool

reference frame. Tap

to zoom in or out. Hold and move the view around to have different

viewpoints of the robot.

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands