Kinova Link 6 User Manual Download Page 25

Page: 25 / 296

EN UG-020 Link 6 user guide r1.0

Figure 7: Size 110 actuator

Figure 8: Size 80 actuator

Each actuator also has a mechanical brake that is activated from the

firmware

or when the power

is removed from the arm.

Wrist interface overview

The

wrist

is a modular component to which a variety of

end effectors

can be attached.

The wrist has buttons for the user to control the robot manually, buttons for the user to interact

with

Kortex Web App

, and LED status indicators on the

wrist ring

to indicate the current state

of the robot. The wrist also has a built-in force torque sensor. The sensor is used in different

applications, such as

Cartesian

Hand Guiding. The sensor ensures the correct amount of force

and torque is used with the tool.
The wrist interface is made of eight main parts, one of which is not visible.

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands