Kinova Link 6 User Manual Download Page 34

Page: 34 / 296

EN UG-020 Link 6 user guide r1.0

Figure 20: Input and output connectors are on the controller behind the side panel

The controller uses 12 VDC to power the internal computer units, which include

Safety Control

Unit (SCU)

Main Processing Unit (MPU)

I/O

module, and optional

GPU

. It uses 48 VDC to power

the arm.
Connect the controller to a power supply from its back.

Figure 21: Back of controller

Fan-powered air exhaust
Electrical input for

alternating current (AC)

power

Unplug the

power cord from the controller and use the brackets around the input to lock

access to the power input whenever you perform maintenance on the robot.

Fanless air intake

RJ45

Ethernet connector

Use the Ethernet connector at the back of the controller to connect to the network.

Note:

Alternatively, use the Ethernet connector on the front of the controller.

Entry plate for I/O connectors

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands