Kinova Link 6 User Manual Download Page 283

Page: 283 / 296

EN UG-020 Link 6 user guide r1.0

275

Cause of the trigger #2

The robot is not calibrated.

Remedy for trigger #2

Procedure

Tap

Systems

Robot

Arm

Expand the

Calibration

pane.

Verify that the calibration status is

Not Calibrated

Tap

Import

in the

Import calibration file

panel to upload the calibration file to the robot.

Important:

Contact [email protected] if the administrator does not have a backup of

the calibration file.

Verify that the calibration status is

Calibrated

Related topics

Adding tools

on page 152

Configuring tools

on page 151

Configuring the arm for robot controls

on page 156

Why is the computer not connecting to Kortex Web App?

Condition

The controller is on, but

Kortex Web App

is not displayed on the computer.

Cause #1

The Ethernet cable is not connected to the computer or the controller.

Remedy #1

Make sure one end of the Ethernet cable is connected to the controller and that the other end is

connected to the computer.

Cause #2

The netmask of the Ethernet interface on the computer does not match the IP address of the

controller.

Remedy #2

Make sure the netmask of your Ethernet interface is appropriate for the range of the two or

more devices that are communicating with the robot. The default IP address of the controller is

192.168.1.10

Cause #3

A user is logged on with the teach pendant.

Remedy #3

Make the user who is using the teach pendant log out.

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands